online conductivity controller, conductivity meter, TDS meter, conductivity probe, conductivity sensor, conductivity electrode-Product Center-Yantai Stark Instrument Co., Ltd.-

PRODUCT CENTER

Index >> Product Center >> Conductivity >> CD-5000 online conductivity controller

Name:	CD-5000 online conductivity controller
Measuring range:	1.0~20.00uS/cm(K=0.01) 0~200.0uS/cm(K=0.1) 0~2000uS/cm(K=1) 0~20.00mS/cm(K=10) 0~200mS/cm
Resolution:	0.01uS/cm
Accuracy:	±2.0%F.S.
Temperature compensation:	0~100℃ NTC 10K (auto)
Output:	4~20mA
Communication interface:	RS-485(optional)
Power supply:	AC220V±10% 50/60Hz

1. Measurement range: 0~20.00uS/cm(K=0.01)

0~200.0uS/cm(K=0.1)

0~2000uS/cm(K=1)

0~20.00mS/cm(K=10)

0~300mS/cm

2. Resolution: 0.01uS

3. Accuracy: ±2.0%F.S.

4. Automatic temperature compensation: 0~100℃ NTC 10K

5. Control interface: two groups ON/OFF relay contact

6. Signal output: 4~20mA

7. Relay: relay delay set, relay load 10A 220VAC

8. Work conditions: ambient temperature of 0~60℃, relative humidity 90%RH

9. Output load: load <500 Omega (0-10mA), <750 ω load (4-20mA)

10. Working voltage: 220VAC ± 10% 50/60Hz

11. Dimensions: 96x96x115 mm

12. Hole size: 91x91mm

13. Weight: 0.8Kg

Large screen liquid crystal display.

Upper and lower limits control transmitter, standard current signal range automatic switch to enhance product resolution.

The screen displays alarm status and is associated with the switch on/off signal output.

Automatic temperature compensation: automatic 0~100℃.

Optional: RS-485 communication interface (MODBUS Protocol).

Watch-dog function: ensure that instrument did not panic.

Restore factory settings. Power-off protection > for 10 years.

CD-5000 is an online intelligent conductivity meter. High performance CPU chip and SMT chip technology salinity. With temperature measurement, temperature compensation, automatic range switching, high precision and repeatability. Can be widely used in chemical fertilizer, environmental, pharmaceutical, culture and continuous monitoring of salinity in the water solution.

Sewage treatment

Aquaculture

Circulating water treatment

Dosing control

Biopharmaceutical

Fermentation

Chemical Industry

Power plant

Influent water treatment

Pretreat influent water before it enters your plant’s system. Proper influent water monitoring is the first defense to protecting the health of your equipment and preventing corrosion. By properly treating water at this stage, you can reduce costs and treatment within the power and steam generating process.

Steam and power generation

Protect your equipment – from pipes and tubes, to turbines and boilers – by ensuring your water is of the highest quality. Minimize silica levels to prevent turbine blade erosion, and monitor and manage dissolved oxygen (DO) to prevent corrosion.

Cooling water

Ensure heat transfer processes are as efficient as possible by effectively controlling total suspended solids (TSS) to avoid the expense and downtime associated with fouling and mineral buildup that can cause scaling and hazardous operating conditions.

Industrial wastewater

Ensure compliance with all discharge requirements. Our industrial wastewater solutions help you minimize environmental impact and ensure compliance with permits.